Renga

The data, information and indications contained in this technical data sheet and in further documents relating to the Renga by Vincent Van Duysen product

are the exclusive property by Ceramiche MUTINA S.p.a. This Technical Data Sheet provides the buyer with information relating to the use of the product useful

for its correct installation and evaluation and prevention of risks arising from the normal use of the same.

Colours

collection

design

production

material

nominal sizes

specification

25

Renga

Vincent Van Duysen, 2022

Artisanal

Glazed casting terracotta

15xh25x15 cm (6”x10”x6”)

– 3 colours: Ivory, Grey, Brown

– Non structural artisanal partition elements

– These elements must comply with the technical standards of construction regulation, applicable in the country where they are installed.

For the Italian national territory, in particular, they should comply with standard NTC 2018 DECRETO MIN 27/01.

– The product is suitable for indoor and outdoor areas complying with UNI EN 772-22 marked “F1-moderate exposure”

Scan the QR code to

download the technical

features in other languages

1

5

15

15

15

laying scheme

laying scheme 1

26,67 pcs / sqm

Laying and maintenance tips

laying scheme 2

28,19 pcs / sqm

laying scheme 3

28,19 pcs / sqm

PCS·SQM

PCS·BOX

see laying scheme 2

SQM·PAL

4,275

BOX·PAL

57

KG·PC

8.30

use

installation

recommended adhesive

cleaning at the end

of installation

general cleaning

(installed tiles)

calibers (real size)

Wall – indoor, outdoor.

554

RENGA

RENGA

555

25

to declare

to declare

to declare

to declare

to declare

Insert a 50 mm wide “Murfor Compact” type reinforcing metal mesh between each horizontal row

and along the entire length of the wall.

Solvents-free, eco-friendly organic adhesive produced by Kerakoll in exclusive for Mutina.

Avoid drippings during installation. If needed the excess can be removed after the product has dried

using a tool with a sharp edge.

–

15 x 25 x 15 with a tolerance of 2 mm (artisanal product)

15

Ivory

Grey

Technical features

Brown

Non structural artisanal partition elements. These elements must in any case comply with the technical standards of construction regulation, applicable in the country where they are

installed. For the Italian national territory, in particular, they should comply with standard NTC 2018 DECRETO MIN 27/01. This product is suitable for indoor and outdoor areas

complying with UNI EN 722-22 marked “F1-moderate exposure”

STANDARD

UNI EN 772-16

UNI EN 772-21:2011

UNI EN 772-5:2016

UNI EN CEN/TS 772- 22:2006

D.M. 1401/2008

VOC Emission

Declaration of Contents

SDS

Packing

SIZE

15·25·15 cm

FEATURES

dimensions

water absorption

content of active soluble salts

freeze-thaw resistance

determination of variable horizontal loads

VALUE REQUIRED

RENGA

T2-R2

0,5%

S0

F1

C2

KG·PAL

473,10