Laying and maintenance tips
Technical features
STANDARD
ISO 10545/3
ASTM C373
ISO 10545/4
ISO 10545/9
ASTM C484
ISO 10545/12
ASTM C1026
ISO 10545/13
ASTM C650
ISO 10545/14
DIN 51130 - 04
DIN 51097
DC0F
Pendulum BS7976-2
LEED CERTIFICATION 4.1
Robinson Test
ISO 9001 - ISO 14001
VOC Emission
Declaration of Contents
SDS
EPD
BPD3
HPD
use
installation
recommended adhesive
recommended joints
recommended fillers
cleaning at the end
of installation
general cleaning
(installed tiles)
calibers (real size)
Colors
Chalk
Lead
Green
Floor, wall – indoor, outdoor.
The material is deliberately shaded. Take the material from several boxes and mix carefully.
Adhesive for porcelain stoneware.
2mm joints. Use wedges to fix the caliber differences in work size between tiles.
Cement-based grout / epoxy grout.
CEMENT-BASED GROUT: Buffered acid (e.g. DETERDEK PRO by FILA, or similar). Wet the floor with water, dilute the product 1:5 with water
and pour it on the floor. Wait for 2 or 3 minutes then use a white scotch brite pad and rinse well with clean water.
EPOXY GROUT: Alkaline detergent (e.g. FILA CR10 by FILA). FILA CR10: apply pure, wait for 30 minutes then use a green scotch brite pad.
SILICONE: Solvent for silicone (e.g. FILA ZERO SIL.). Pour it straight onto the stain, wait for 20 minutes and remove the mark using
scotch brite.
PAINT: Can usually be removed using water, but if resin-based paints or particular enamels have been used, it is best to ask the manufacturer
which solvent is most suitable.
RUST: stain remover es. FILA NO RUST. Apply the product onto the stain, leave for 15 minutes, remove the residue and rinse thoroughly.
You are recommended to use ordinary neutral detergent diluted in water. Avoid using acid or alkaline products, waxes and/or impregnants.
During ordinary cleaning it is recommended to use extremely abrasive items (such as scourers and iron or steel sponges) as little as possible.
This recommendation must be adhered to rigorously in the case of tiles with a glossy surface finishing as they are more susceptible to the risk
of scuffs, scratches and loss of shine, etc. In the event of heavy dirt or particularly textured surfaces, use an alkaline detergent and rinse after
washing. For large surfaces, the use of a floor washing machine is recommended. During every-day cleaning procedures, it is necessary to
remember that certain types of dirt (dust, sand) increase the abrasive effect of foot-traffic. Therefore we recommend that you avoid bringing in
this type of dirt, which comes in from the outside, by placing a door-mat at the entrance.
5,5 x 45 (linear) - 53 mm x 447 mm
5,3 x 39,4 (chevron) - 53 mm x 393 mm
5,5 x 19,6 (chevron)- 53 mm x 192 mm
11 x 11 (square) - 109 mm x 109 mm
Fog
Pigeon
Ink
Soot
Pink
Light Blue
FEATURES
water absorption
breaking strength
resistance to thermal shock
frost resistance
resistance to chemical attacks
VALUE REQUIRED
< 0,5%
< 0,5%
Sp> 7,5 min 1300
no visible alteration
no samples must show
no visible alteration
unaffected
no visible alteration
visible defects
MEWS
0,04%
0,04%
resistant
resistant
unaffected
resistant
unaffected
resistant
unaffected
class 5
R10
–
0,80
55 dry / 46 wet
13,8% - 15,3%
heavy use
available upon request
available upon request
available upon request
available upon request
available upon request
available upon request
stains resistance
slip resistance
class 3
medium values
6÷10°
10÷19°
19÷27°
27÷35°
R9
R10
R11
R12
R13
> 35°
–
> 0,42
–
–
V4
dramatic variation
Packing
SIZE
5,5·39,4 cm chevron
5,5·19,6 cm chevron
5,5·45 cm
11·11 cm
step 33·45·4,5 cm
corner tile 33·33·4,5 cm
skirting 3,8·45 cm
PCS·SQM
46,15
92,76
40,40
82,64
-
-
-
PCS·BOX
36
72
36
60
2
1
10
SQM·BOX
BOX·PAL
40
40
40
48
–
–
–
KG·BOX
14,40
14,40
16,65
16,15
7,20
5,49
3,28
KG·PAL
576
576
666
775,20
–
–
–
SQM·PAL
31,20
31,20
35,60
35,04
–
–
–
0,78
0,78
0,89
0,73
0,90
0,33
4,50
ml
ml
ml
For information about the available grouts, please contact the sales department.
476
MEWS
MEWS
477
