Mattonelle Margherita
Colours
27 PATTERNS
20,5X20,5 CM
Square Blue
Double Red
Rhombus White
Spring Pink
6 PLAIN COLOURS
20,5X20,5 CM
Marghe White
8 HALF
10,1X20,5 CM
Marghe Half White
Parallel Black
collection
design
production
material
thickness
nominal sizes
specification
anti-slip
awards
patent
category
20,5·20,5 cm
8”·8”
Mattonelle Margherita
Nathalie Du Pasquier, 2020
Industrial
Glazed porcelain stoneware
10 mm
Margherita Patterns, Margherita Plain Colours 20,5·20,5 cm (8”·8”)
Margherita Half 20,5·10,1 cm (8”·4”)
– 6 base colour in 20,5·20,5 cm
– 27 graphic patterns in 20,5·20,5 cm
– 8 half in 10,1·20,5 cm
– Semi-gloss, silky surface
Special treatment is available upon request, at extra charge
Interior Design Magazine’s Best of Year Awards 2021 in the Category Tile + Stone Flooring
Registered design n° 008171615-0001/0067 – date of registration: 30.09.2020
BIa UNI EN 14411 (GL)
20,5·10,1 cm
8”·4”
Scan the QR code to
download the technical
features in other languages
Square Green
Cones
Rhombus Black
Black Green
Marghe Black
Marghe Half Black
Parallel Orange
Square Black
Star
Flower Green
Black Terracotta
Marghe Terracotta
Frame Black
Square Orange
Petals
Flower Black
Line
Marghe Green
Frame Terracotta
Square Terracotta
Corners
Kite White
Stripes
Marghe Blue
Street
Double Blue
Scheme
Kite Black
Signs
Marghe Light Blue
Wires
Double White
Point
Spring Terracotta
Laying and maintenance tips
use
installation
recommended adhesive
recommended joints
recommended fillers
cleaning at the end
of installation
general cleaning
(installed tiles)
calibers (real size)
Floor, wall – indoor, outdoor.
For an even, smooth shading effect when laying, alternate material from several different boxes.
Adhesive for porcelain stoneware.
2mm joints.
Cement-based grout / epoxy grout.
CEMENT-BASED GROUT: Buffered acid (e.g. DETERDEK PRO by FILA or similar). Wet the floor with water, dilute the product 1:5 with water
and pour it on the floor. Wait for 2-3 minutes then use a white scotch brite pad and rinse well with clean water.
EPOXY GROUT: Alkaline detergent (e.g. FILA CR10 by FILA). FILA CR10: apply pure, wait for 30 minutes then use a green scotch brite pad.
SILICONE: Solvent for silicone e.g. FILA ZERO SIL. Put it straight onto the stain, wait for 20 minutes and remove the mark using scotch brite.
PAINT: Can usually be removed using water, but if resin-based paints or particular enamels have been used, it is best to ask the manufacturer
which solvent is most suitable.
RUST: stain remover es. FILA NO RUST. Apply the product onto the stain, leave for 15 minutes, remove the residue and rinse thoroughly.
You are recommended to use ordinary neutral detergent diluted in water. Avoid using acid or alkaline products, waxes and/or impregnants.
During ordinary cleaning it is recommended to use extremely abrasive items (such as scourers and iron or steel sponges) as little as possible.
This recommendation must be adhered to rigorously in the case of tiles with a glossy surface finishing as they are more susceptible to the risk
of scuffs, scratches and loss of shine, etc. In the event of heavy dirt or particularly textured surfaces, use an alkaline detergent and rinse after
washing. For large surfaces, the use of a floor washing machine is recommended. During every-day cleaning procedures, it is necessary to
remember that certain types of dirt (dust, sand) increase the abrasive effect of foot-traffic. Therefore we recommend that you avoid bringing in
this type of dirt, which comes in from the outside, by placing a door-mat at the entrance.
20,5x20,5 : cal 1 : from 203,6x203,6 to 205x205 - cal 0 : from 202,1x202,1 to 203,5x203,5
20,5x10,1 : cal 1 : from 101,2X203,6 to 101,2X205 - cal 0 : from 100,4X202,1 to 100,4X203,5
(calibers depend on the production lot, we recommend to ask in advance)
472
MATTONELLE MARGHERITA
MATTONELLE MARGHERITA
473
For information about the available grouts, please contact the sales department.
