Laying and maintenance tips
Technical features
use
installation
recommended adhesive
recommended joints
recommended fillers
cleaning at the end
of installation
general cleaning
(installed tiles)
calibers (real size)
Colours
Uni Beige
Uni Moka
Floor, wall – indoor, outdoor.
For an even, smooth shading effect when laying, alternate material from several different boxes.
The double spreading technique is recommended for the 120x120 size.
Adhesive for porcelain stoneware.
2mm joints. Use wedges to fix the caliber differences in work size between tiles.
Cement-based grout / epoxy grout.
Remove all traces of grout carefully before it dries completely.
CEMENT-BASED GROUT: Buffered acid (e.g. DETERDEK PRO by FILA, or similar). Wet the floor with water, dilute the product 1:5 with water
and pour it on the floor. Wait for 2 or 3 minutes then use a white scotch brite pad and rinse well with clean water.
EPOXY GROUT: Alkaline detergent (e.g. FILA CR10 by FILA). FILA CR10: apply pure, wait for 30 minutes then use a green scotch brite pad.
SILICONE: Solvent for silicone (e.g. FILA ZERO SIL.). Pour it straight onto the stain, wait for 20 minutes and remove the mark using
scotch brite.
PAINT: Can usually be removed using water, but if resin-based paints or particular enamels have been used, it is best to ask the manufacturer
which solvent is most suitable.
RUST: stain remover es. FILA NO RUST. Apply the product onto the stain, leave for 15 minutes, remove the residue and rinse thoroughly.
You are recommended to use ordinary neutral detergent diluted in water. During ordinary cleaning it is recommended to use extremely
abrasive items (such as scourers and iron or steel sponges) as little as possible. This recommendation must be adhered to rigorously in the
case of tiles with a glossy surface finishing as they are more susceptible to the risk of scuffs, scratches and loss of shine, etc. In the event of
heavy dirt or particularly textured surfaces, use an alkaline detergent and rinse after washing. For large surfaces, the use of a floor washing
machine is recommended. During every-day cleaning procedures, it is necessary to remember that certain types of dirt (dust, sand) increase
the abrasive effect of foot-traffic. Therefore we recommend that you avoid bringing in this type of dirt, which comes in from the outside, by
placing a door-mat at the entrance.
STANDARD
ISO 10545/2
ISO 10545/3
ASTM C373
ISO 10545/6
ISO 10545/9
ASTM C484
ISO 10545/12
ASTM C1026
ISO 10545/13
ASTM C650
ISO 10545/14
DIN 51130-04
DIN 51097
Pendulum BS
Pendulum AS/NZS
DCOF
LEED CERTIFICATION 4.1
ENVIRONMENTAL MANAGEMENT
SYSTEM ISO 14000 AND ISO 9001
VOC Emission
Declaration of Contents
EPD
SDS
BPD3
HPD
Packing
FEATURES
SIZES
length and width
thickness
straigthness of edges
wedging
flatness
water absorption
resistance to deep abrasion
resistance to thermal shock
frost resistance
resistance to chemical attacks
VALUE REQUIRED
MATER
± 0,6%
± 5%
± 0,5%
± 0,6%
± 0,5%
< 0,5%
< 0,5%
<175 mm3
no visible alteration
no samples must show
no visible alteration
unaffected
no visible alteration
visible defects
in conformity with standard
0,06%
0,06%
in conformity
resistant
unaffected
resistant
unaffected
resistant
unaffected
5
Segno R9
Uni R11
Uni B
Segno A
UNI 50 dry, 40 wet
SEGNO 45 dry, 25 wet
UNI P3
SEGNO P2
UNI 0.62
SEGNO 0.29
20% recycled material
available upon request
available upon request
available upon request
available upon request
available upon request
available upon request
120cm·120cm -> 1190mm·1190mm
60cm·60cm -> 594mm x 594mm
15cm·60cm -> 147mm·594mm
Segno Bianco
Segno Nero
stains resistance
slip resistance
minimum 3
medium values
6÷10°
10÷19°
19÷27°
27÷35°
> 35°
–
R9
R10
R11
R12
R13
Segno Blu
Segno Verde
Segno Terra
Segno Ocra
SIZE
PCS·SQM
120·120
0,69
60·60
2,78
15·60
11,11
skirting
PCS·BOX
2
4
10
10
SMQ·BOX
2,88
1,44
0,90
6 ml
BOX·PAL
20
32
52
KG·BOX
KG·PAL
SQM·PAL
66
1320
57,60
33
1056
46,08
20,60
1071
46,80
4
For information about the available grouts, please contact the sales department.
470
MATER
MATER
471
