Packing

SIZE

losange 27,5·25,7 cm

triangle extra small on net

18·31,5 cm

triangle small on net

18,6·31,5 cm

triangle large on net

18,6·31,5 cm

terminal extra small

terminal small

terminal large

listello 8·31,5·0,6 cm

PCS·SQM

14,00

17,40

17

17

–

–

–

–

PCS·BOX

7

11

9

9

10

10

10

–

SQM·BOX

BOX·PAL

90

63

63

63

–

–

–

KG·BOX

5,00

10,35

10,55

9,45

3,25

3,25

3,25

–

KG·PAL

450

652,05

664,65

595,35

–

–

–

SQM·PAL

45,00

39,06

33,40

33,40

–

–

–

Tape

collection

design

production

material

thickness

nominal sizes

specification

patents

category

20,5·20,5 cm

8”·8”

0,50

0,62

0,53

0,53

2,69

2,57

2,46

–

ml

ml

ml

Scan the QR code to

download the technical

features in other languages

Tape

Raw Edges, 2017

Industrial

Glazed porcelain stoneware

10 mm

20,5·20,5 cm (8”·8”)

– 2 base colour: White and Black

– 8 graphic patterns (full pattern)

– 8 graphic “half patterns” to create connections and a soft blend on one pattern with the other

– 5 combinations of base+coloured patterns: 1 on Black base and 4 on White base

– Though the tile is NON RECTIFIED the patterns are perfectly centered to obtain a continuous and homogeneous surface

– 5 different glazing surface textures random mixed

Registered design n° 004427748-0001/0027 – date of registration: 31/10/2017

UNI EN 14411 App G (BIA group) GL

Laying and maintenance tips

use

installation

recommended adhesive

recommended joints

recommended fillers

cleaning at the end

of installation

general cleaning

(installed tiles)

calibers (real size)

Floor, wall – indoor, outdoor.

For an even, smooth shading effect when laying, alternate material from several different boxes.

Adhesive for porcelain stoneware.

2mm joints. Use wedges to fix the caliber differences in work size between tiles.

Cement-based grout / epoxy grout.

CEMENT-BASED GROUT: Buffered acid (e.g. DETERDEK PRO by FILA, or similar). Wet the floor with water, dilute the product 1:5 with water

and pour it on the floor. Wait for 2 or 3 minutes then use a white scotch brite pad and rinse well with clean water.

EPOXY GROUT: Alkaline detergent (e.g. FILA CR10 by FILA). FILA CR10: apply pure, wait for 30 minutes then use a green scotch brite pad.

SILICONE: Solvent for silicone (e.g. FILA ZERO SIL.). Pour it straight onto the stain, wait for 20 minutes and remove the mark using

scotch brite.

PAINT: Can usually be removed using water, but if resin-based paints or particular enamels have been used, it is best to ask the manufacturer

which solvent is most suitable.

RUST: stain remover es. FILA NO RUST. Apply the product onto the stain, leave for 15 minutes, remove the residue and rinse thoroughly.

You are recommended to use ordinary neutral detergent diluted in water. Avoid using acid or alkaline products, waxes and/or impregnants.

During ordinary cleaning it is recommended to use extremely abrasive items (such as scourers and iron or steel sponges) as little as possible.

This recommendation must be adhered to rigorously in the case of tiles with a glossy surface finishing as they are more susceptible to the risk

of scuffs, scratches and loss of shine, etc. In the event of heavy dirt or particularly textured surfaces, use an alkaline detergent and rinse after

washing. For large surfaces, the use of a floor washing machine is recommended. During every-day cleaning procedures, it is necessary to

remember that certain types of dirt (dust, sand) increase the abrasive effect of foot-traffic. Therefore we recommend that you avoid bringing in

this type of dirt, which comes in from the outside, by placing a door-mat at the entrance.

20,5x20,5 : cal 1 : from 203,6x203,6 to 205x205 - cal 0 : from 202,1x202,1 to 203,5x203,5

(calibers depend on the production lot, we recommend to ask in advance)

510

ROMBINI

TAPE

511